Coronatest SARS-CoV-2 Rapid Antigen Self-Test Nasal by SD Biosensor Roche
Get a super-spreader out quickly. Convenient testing, Rapid results.
Reliable, rapid chromatographic immunoassay for detecting nucleocapsid antigen, these are present in nasal samples.
Easy sample collection by short nasal swab with the SARS-CoV-2 Rapid Antigen Test Nasal, less inconvenient for the patient, this sample collection reduces coughing and sneezing during the procedure.
Nasal nasal samples may now be self-collected.
Why do I use nasal AG rapid tests before? What are the advantages ofthe Roche Coronatest SARS-CoV-2 Rapid Antigen Test Nasal ?
- The collection at the front of the nose is less disturbing, especially for sensitive or sick persons
- Easy to use, approved as a self-test and may be self-collected
- The kit is supplied ready to use
- No instruments or readers required
- Pre-filled buffer bottles for each test
- A quick result, already know after 15 min whether someone is infectious
- Get the super diffusers out immediately,
- No long waiting times for results, with risk of further infections
- Possible to test even if no labs are available
- Patient can perform this test themselves, avoiding infection of caregivers.
The Roche Corona test is a rapid test SARS-CoV-2 Rapid Antigen Test Nasal that gives you results within 15-30 minutes and is less disruptive to the patient. The nasal sticks only need 2 cm in the nose which makes the test even faster.
Contents of the box nasal corona rapid tests :
The kit is ready to use and contains all the necessary material to perform a corona test.
These self-tests are packed in boxes of 5.
Sales unit is 4x5 Corona Tests
Package contents 4x5 self-tests
- 20 Test device
- 20 Extraction buffers
- 20 Cap nozzle
- 20 Sterile swab
- 20 Buffer tube rack
- 4 Manuals
- Store at room temperature (+2 - +30°C)
How is this Coronatest rapid test taken ?
1A Gently twist the swab into the nostril. Insert the swab about 2 cm deep, parallel to the palate, in the direction of the throat until you collide with the nasal passages. Do not apply pressure.
Rotate the cotton swab 4 times for 15 seconds, Then remove the swab.
1B Do the same in the other nostril. Note : samples should be taken with the same swab.
2A Place the swab in an extraction buffer tube. Rotate the swab 12 times while squeezing the tube.
2B Remove the swab while still squeezing the tube so that you extract the liquid from the swab. Note : If you do not squeeze the tube, there is a risk of incorrect results.
2C Press the cap firmly onto the tube.
3A Place the tester on a flat surface and apply 4 drops of the sample 90°.
3B Read the test results for up to 15-30 minutes. Note: after 30 minutes, there is a high risk of incorrect results.
Reading results?
A coloured line appears in the upper part of the results window to indicate that the test is working correctly. This is the control line (C). Even if the control line is weak, the test should be considered correct. If no control line is visible, the test is invalid.
In case of a positive result, a race barrier appears in the lower part of the results window. This is the test line (T). Even if the test line is very weak or not uniform, the test result should be interpreted as a positive result.
Test specifications:
Specificity: 98.6%
Sensitivity: 90.6%
