INTRAUTERINE INSEMINATION CANNULA
The insemination catheter is suitable for intrauterine lateral artificial insemination of sperm.
The insemination catheter contains :
- a distal flexible tube in polyethylene with 2 lateral openings at the tip
- a fixed proximal tube, graduated in polypropylene
The intrauterine insemination cannula has a standard luer-lock connection.

Some references of the insemination catheter are equipped with a rigid polystrene inserter that has a polyethylene plug at each end and or a mandrel in polyethylene covering a stainless steel rod.
At the Luer Lock end are 2 lateral handles flush with the orifices to optimally position the catheter.

Technical specifications of the intrauterine cannula:
- Length of the distal portion : 45mm
- Graduated per cm
- Packaging : box of 25 pieces
- Sterilised by radiation

The intrauterine insemination catheter is available in the following sizes/models:
-Outer diameter : 1.65mm/CH5 inner diameter 1.1/0.20 Diameter of openings : 1mm
-Outer diameter : 2.00mm/CH6 inner diameter 1.6/0.40 Diameter of openings : 1.3mm
-Outside diameter : 1.65mm/CH5 inside diameter 1.1/0.20 Diameter of apertures : 1mm -with applicator
-Outer diameter : 2.00mm/CH6 inner diameter 1.6/0.40 Diameter of openings : 1.3mm - with inserter
-Outer diameter : 1.65mm/CH5 inner diameter 1.1/0.20 Diameter of holes : 1mm - with mandrel
-Outer diameter : 2.00mm/CH6 inner diameter 1.6/0.40 Diameter of holes : 1.3mm - with mandrel
-Outer diameter : 1.65mm/CH5 inner diameter 1.1/0.20 Diameter of apertures : 1mm - with mandrel n applicator
-Outer diameter : 2.00mm/CH6 inner diameter 1.6/0.40 Diameter of orifices : 1.3mm - with mandrel and applicator

This intrauterine insemination cannula should only be used by a medically competent person, qualified to do so and aware of pathologies.